59
3.6. WPS
Use the unique WPS (Wi-Fi Protected Setup) function to insure your wireless security, and you may
complete the setup of wireless configuration and encryption within a simple click on a button. However,
this function only works on Windows 2000 and XP OS.
•
WPS: Click this check box to enable the WPS function.
•
Mode: You can click the scroll-down menu to choose the “Registrar” mode or “Enrollee” mode.
•
Device PIN code: This field shows the PIN code of MZK-W04NU.
•
Enter PIN code: You can enter the PIN code of the client device, and click “Start” to start WPS con-
nection. After clicking the “Start” button, you have 2 minutes to get to the client device and press its
WPS button.
•
Status: You can click “Initialize” button to start WPS connection. You have 2 minutes to go to the
wireless device you would like to connect. After clicking the “Initialize” button, you have 2 minutes to
get to the client device and press its WPS button.
•
Apply: Click this button to save and apply the settings you just made. MZK-W04NU will reboot and
apply all the changes you made.
•
Save: Click this button to save the settings you made and returns to the current page. MZK-W04NU
will not reboot, and the changes you made will not be applied just yet.
•
Clear: If there is anything wrong with the settings you made, you can click “Clear” to configure the
page again.
Note: You can push the “WPS” button on the upper part of MZK-W04NU to start WPS connection
as well. You have 2 minutes to get to the client device and press its WPS button.