manualshive.com logo in svg

Conrad MZK-W04NU, Руководство по эксплуатации, Страница: 42 / 76

Поделиться
Скачать
Conrad MZK-W04NU Скачать руководство пользователя страница 42

41

1.3. Dynamic DNS

Dynamic DNS can let you connect with one or more DDNS services to update your current dynamic IP
address. To make a WEB server publicly accessible on the Internet, a static global IP address needs to
be assigned to MZK-W04NU. Even when there is an always-on connection, however, disconnection
does occur and the IP address may dynamically change after reconnection. When Dynamic DNS is
enabled, the IP address of the product is reported to a Dynamic DNS server at regular intervals so that it
can use the same static host name even after IP has changed.

MZK-W04NU supports www.dyndns.org, cybergate.planex.co.jp and MyDNS.jp Dynamic DNS services.
www.dyndns.org, cybergate.planex.co.jp and MyDNS.jp are free services. Before enabling DDNS con-
figuration on the product, be sure to access either of the former websites and register your user name,
password, host name, and so on. 

CyberGate -DDNS-
•

CyberGate –DDNS-: You may choose a DDNS provider and then click to enable DDNS function. The
default status is Disabled.

•

Last Updated: Show the status of last update.

•

Subdomain: Enter the sub-domain which you registered on CyberGate website.

•

Domain: Select the Domain Name which you registered.

•

Password: Enter the Password or Key which you use to login the service. 

•

Confirm Password: Enter the Password again for verification. 

•

Interval: Choose an interval to renew DNS information. You can choose: 1 Day, 3 Days, 5 Days, 1
Week, or 2 Weeks.

•

Off Line: Click to be off-line.

Содержание MZK-W04NU













































































Отзывы:

Нет отзывов