Conrad 85 69 97, Руководство по эксплуатации

Страница: 21 / 44

21
8. Replacing the Power Station Lead Accumulator
Please proceed as follows to replace the lead accumulator
• Remove the 10 casing screws on the back of the power station.
• Take off the back cover of the casing.
• Remove the lead accumulator and disconnect it..
• Replace the lead accumulator with a new one (recommended: 12V, 7Ah).
• Connect the connection lines again. Ensure that you insert them in the correct polarity (red = plus,
black = minus).
• Close the back of the casing again and attach it with the casing screws removed previously.
9. Maintenance and Cleaning
The device requires no servicing on your part apart from replacing the rechargeable battery.
To clean the outside of the component casings, a dry, soft and clean cloth is sufficient. For stronger dirt on
the solar panels, you can moisten the cloth with warm water.
Never use any aggressive cleaning agents.
10. Disposal
a) General Information
At the end of its service life, dispose of the product according to the relevant statutory regu-
lations.