Conrad 85 69 97, Руководство по эксплуатации

Страница: 14 / 44

14
In case of technical questions please contact us:
Germany: Tel. 0180/5 31 21 11,
Fax 0180/5 31 21 10
E-mail: Please use our contact form in the Internet:
www.conrad.de in the category "Contact"
Mon to Thurs 8.00am to 4.30pm Fri 8.00am to 2.00pm
Read through the following operating instructions thoroughly before connecting or commissioning the
device. They explain not only the correct operating procedure but also help to exploit all technical possi-
bilities of the system.
2. Intended Use
This set, consisting of a solar panel and power station, is intended for generating and storing energy and
for drawing 12V/DC or 24V/DC power. The 12V/7Ah lead accumulator integrated into the power station
can operate devices of up to 150 watt. Additionally, the power station has an inverter output for con-
nection of, e.g., a voltage transformer. Where required, an additional lead accumulator can be connected
to the “connection for external 12V lead accumulator” for increased capacity (=longer operational time of
connected consumers).
The solar panel can also be used for charging external lead accumulators (e.g. 12V, 18V or 24V lead
accumulator) a connection cable with terminal clamps is included in the delivery.
The solar panel transforms the radiation energy in light (usually sunlight) into electrical power. With best
sun radiation, the performance can reach 13 watt.
The solar panel is suitable for outdoor use (IP43). The power station must not get damp or wet.
Use other than that described above will lead to damage of the product and may also involve additional
risks such as short circuits, fire, electric shocks etc. The safety instructions must be adhered to! No part
of this product may be modified or rebuilt.
Observe the safety instructions under all circumstances!