Conrad 750945, Руководство по эксплуатации

Страница: 63 / 159

63
4. Exiting registration mode
• The mode is automatically existed after 15 minutes or by pressing any button on the alarm dialer.
• The red LED "Mode" goes out, the registration mode is existed, the alarm dialer goes back to
normal operation.

Please note:
With the alarm dialer as well as with smoke detectors
no
addresses are deleted or
changed in the case of a change of batteries. The address data remain. This is why it is
not necessary to reregister the smoke detectors.
Normally the same is the case for a registered "KeyMatic CAC".
c) Deleting all sensor addresses
Deleting all sensor addresses may be necessary when the address storage of the alarm dialer is full
(eg because of test registrations). The same can be done when old smoke detectors that are no
longer used or "KeyMatic CAC" addresses are to be deleted.

Afterwards a completely new registration of all the devices that belong to the system
("KeyMatic CAC" and/or "RM50" smoke detector) is necessary.
1. Activate programming mode
• Press "
Prg
" key
• Red LED "Mode" lights up, entry level 1 is active
2. Select "Add" mode
• Press key "
Mod
" , then press key "
2
"
• Now all sensor addresses are deleted.
• The red LED "Mode" goes off, the programming mode is terminated and the alarm dialler returns
to the normal operation