Conrad Electronic 751549, Руководство по эксплуатации

Страница: 51 / 118

8.11 Function Settings
☞
To carry out this programming step the code lock should now be in
programming mode (see Chapter “8.1 Entering Programming Mode”).
a) Setting Input Method:
You can determine which input method should activate the relay outputs.
Two input methods are available.
Input Method 1:
User code #
Input Method 2:
User code
Enter the following key combination to set the unit to input method 1:
70 0 #
Enter the following key combination to set the unit to input method 2:
70 1 #
The factory setting is "7-00".
b) Setting Acoustic Signalling of Relay Activation
You can determine whether a signal tone should be emitted or not when the relay is activated.
Enter the following key combination to deactivate the signal tone when the relay is
activated:
71 0 #
Enter the following key combination to activate the signal tone when the relay is activated
(in this setting a signal tone is emitted for 1 second when the relay is activated):
49