Conrad Electronic 751549, Руководство по эксплуатации

Страница: 43 / 118

Status "STATUS" "PASS" "AUX" Acoustic "KEY ACT"
LED (3) LED (4) LED (2) signal trans- LED (1)
mitter (11)
Programming mode Lit Lit
During programming Lit Permanent
blinking
Conformation of Lit Lit 2 beeps
successful programming
(pressing the key "#")
Alarm status Permanent Permanent
blinking sound of a
beep
8. Programming
Before you can use the code lock you need to program it to your individual requirements.
All the required programming steps are explained to you in the following.
8.1 Entering Programming Mode
Enter the following key combination to enter the programming mode:
* MASTERCODE #
As soon as you are in the programming mode the status LED “STATUS” (3) and the sta-
tus LED “PASS” are lit.
☞
Please note that the device exits programming mode automatically if
there is no input for 10 seconds.
8.2 Exiting Programming Mode
You can leave the programming mode by pressing the “*” button.
41