Conrad Electronic 751549, Руководство по эксплуатации

Страница: 50 / 118

Example delete user code:
52 5648 #
c) Deleting User Codes using the User Number
To delete user codes from “OUTPUT 2” (G) using the corresponding user number, enter
the following key combination:
53 Enter the user number of the user code to be deleted #
Example delete user code using user number:
53 894 #
8.10 Programming the Timer and the Activation Method for
“OUTPUT 2”
☞
To carry out this programming step the code lock should now be in
programming mode (see Chapter “8.1 Entering Programming
Mode”).
You can programme whether the relay output 2 “OUTPUT 2” (G) is activated only for a
specific period of time (01-99 seconds) or whether it should be blocked.
a) To assign an activation time for activation of the relay output 2 “OUTPUT 2” (G)
enter the following key combination:
60 Time in seconds #
(you can programme from 01 to 99 seconds)
Example for 86 second activation time:
60 86 #
The factory setting is a 3 second activation time.
b) To block the relay output 2 “OUTPUT 2” (G) enter the following key combination:
61 #
48