Conrad Electronic 751549, Руководство по эксплуатации

Страница: 45 / 118

8.5 Assigning ID Cards and User Codes to OUTPUT 1
8.5.1 What is a User Number
If you wish to programme an ID card or a user code to activate the relay output “OUTPUT
1” (F), you must always assign a user number to that card or code.
A user number is a number under which the ID card and/or the user code is saved.
In order to make clear the connection between the user number, ID card and user code, the
following example table provides a list of 7 programmed user numbers.
User number ID card Usercode
1111 ID card 1
1112 ID card 2
1113 9876
1114 4289
1115 ID card 3
1116 8946
A user number is thus nothing other than a memory location under which you must save
ID card and/or the user code.
☞
Note that the user numbers for “OUTPUT 1” (F) must be 4 digits long
and those for “OUTPUT 2” (G) must be 3 digits. The user code must
always be 4-8 digits long.
User numbers cannot be assigned twice.
8.5.2 Programming ID Cards to “OUTPUT 1” (F)
☞
To carry out this programming step the code lock should now be in
programming mode (see Chapter “8.1 Entering Programming
Mode”).
To programme an ID Card to the relay output “OUTPUT 1” (F) enter the following key
combination:
43