background image

-

2

The sweeper is intended for cleaning floor 
surfaces for commercial use and e.g. for 
the following fields of application:

Car parks

Production facilities

Logistics areas

Hotel

Retail industry

Storage areas

Walkways

This sweeper has been designed to
sweep dirt and debris from indoor as
well as outdoor surfaces.

The machine with working equipment
must be checked to ensure that it is in
proper working order and is operating
safely prior to use. Otherwise, the appli-
ance must not be used.

Use this sweeper only as directed in
these operating instructions.

The machine may not be modified.

The machine is only suitable for use on
the types of surfaces specified in the 
operating instructions.

The machine may only be operated on
the surfaces approved by the company
or its authorised representatives.

The following applies in general: Keep
highly-flammable substances away
from the appliance (danger of explo-
sion/fire).

Never vacuum up explosive liquids,
combustible gases or undiluted acids 
and solvents. This includes petrol, paint 
thinner or heating oil which can gener-
ate explosive fumes or mixtures upon 
contact with the suction air. Acetone, 
undiluted acids and solvents must also 
be avoided as they can harm the mate-
rials on the machine.

Never sweep/vacuum up reactive metal
dusts (e.g. aluminium, magnesium,
zinc), as they form explosive gases
when they come in contact with highly
alkaline or acidic detergents.

Do not sweep/vacuum up any burning
or glowing objects.

The appliance is not suitable for sweep-
ing off hazardous substances.

The machine may not be used or stored
in hazardous areas. It is not allowed to
use the appliance in hazardous loca-
tions.

It is strictly prohibited to take co-pas-
sengers.

Pushing/pulling or transporting objects
by means of this appliance is prohibit-
ed.

Asphalt

Industrial floor

Screed

Concrete

Paving stones

In order to maintain clearance and
creepage distances, the device may not 
be operated over 2000 metres above
sea level.

(Applicable for Finland only) The device 
may not be used at low ambient tem-
peratures (below 0°C) if it is equipped
with a PVC hose line. Contact ISAL if
you should have questions regarding
your device.

The machine with working equipment
must be checked to ensure that it is in
proper working order and is operating
safely prior to use. Otherwise, the appli-
ance must not be used.

If the appliance is used in hazardous ar-
eas (e.g. filling stations) the corre-
sponding safety provisions must be ob-
served. It is not allowed to use the ap-
pliance in hazardous locations.

DANGER

Risk of injury!

Do not use the appliance without an
overhead guard in areas where the op-
erator might get hit by falling objects.

The operator must use the appliance
properly. The person must consider the 
local conditions and must pay attention
to third parties, in particular children,
when working with the appliance.

It is important to follow all safety instruc-
tions, rules and regulations applicable
for driving motor vehicles.

Prior to starting work, the operator must 
ensure that all protective devices are
properly installed and function correct-
ly.

The operator of the appliance is liable
for accidents with other individuals or
their property.

Ensure that the operator wears tight-fit-
ting clothes. Wear sturdy shoes and
avoid wearing loose-fitting clothes.

Check the immediate vicinity prior to
starting (e.g. children). Ensure suffi-
cient visibility!

Never leave the machine unattended
so long as the engine is running. The
operator may leave the appliance only
when the engine has come to a stand-
still, the appliance has been protected
against accidental movement, and the
key has been removed.

Please remove the key, when not in
use, to avoid unauthorised use of the
appliance.

The appliance may only be used by per-
sons who have been instructed in han-
dling the appliance or have proven
qualification and expertise in operating
the appliance or have been explicitly
assigned the task of handling the appli-
ance.

This appliance is not intended for use
by persons (including children) with lim-
ited physical, sensoric or mental capac-
ities or lack of experience and/or skills,
unless such persons are accompanied
and supervised by a person in charge of 
their safety or if they received precise
instructions on the use of this appli-
ance.

Children should be supervised to pre-
vent them from playing with the appli-
ance.

CAUTION

Risk of damage! Do not sweep up straps, 
strings or wires as these may wrap around 
the brush roller.

DANGER

Risk of injury! Verify the stability of the
ground prior to driving on it.

DANGER

Risk of accident, risk of injury!
Danger of tipping if gradient is too high.

The gradient in the direction of travel
should not exceed 14 %.

Danger of tipping over when taking bends 
at high speed (particularly left-hand bends).

Drive slowly when cornering.

Danger of tipping on unstable ground.

Only use the machine on sound surfac-
es.

Danger of tipping with excessive sideways 
tilt.

The gradient perpendicular to the direc-
tion of travel should not exceed 10%.

Note:

 Claims may only be made under 

guarantee if you use the batteries and 
chargers recommended by ISAL.

Always follow the instructions of the
battery manufacturer and the charger
manufacturer. Please follow the statu-
tory requirements for handling and dis-
posing batteries.

Beware of dangerous 
electrical current!

Pay attention to the in-
struction.

Steer slowly!

Please read the operating 
instructions and act ac-
cordingly!

Risk of damage!
Do not rinse out the dust 
filter.

Proper use

Foreseeable misuse

Suitable surfaces

Safety instructions

Safety instructions concerning the 

operation

Safety information concerning the 

driving operation

Safety instructions for battery-

operated devices

16

EN

Содержание PB120E















































Отзывы: