CONQUEST PB120E, Руководство оператора

Страница: 12 / 46

-
10
 Insert and lock the filter cover.
 Unscrew the head lamps.
 Take out the head lamps and pull out
the plug.
Note: Note the positions of the plugs.
 Dismantle the head lamps.
 Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.
 Unlock the bracked and take out the
bulb.
 Insert new bulb.
 Reinstall in reverse sequence.
Note: Remove the glass of the direction-in-
dicator lamp from its casing to replace the
bulb.
1 Lock nut
2 Cover fuse box
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
* These fuses may only be changed by
Customer Service, as it is necessary to
check the device for potential faults.
Changing the headlight bulb (option)
Changing the blinker bulb (option)
Replacing fuses
FU 01 Safety relay
Drive pedal 3 A
FU 02 Multifunction display 5 A
FU 03 Battery shut-off 3 A
FU 04 Driving direction
switch 3 A
FU 05 Drive control 3 A
FU 06 Vibrator system 15 A
FU 07 Suction system control 3 A
FU 08 Beacon lamp 7.5 A
FU 09 Horn 7.5 A
FU 10 Lights 15 A
FU 11 Wiper 3 A
FU 12 Driver cabin (optional) 10 A
FU 13* Drive motor 125 A
FU 14* Electro motor 100 A
FU 15* Suction blower 20 A
24 EN