www.conquerordoors.com
4
3.4
Opener Head to Rail Assembly
3.4.1
Opener connection
Assemble opener as shown
in Figure 7, fasten four anti-loose
screw M8 × 16.
3.4.2
Slide Rail Assembly and Disengage Mechanism
As shown in Figure 8, fasten the disengagement
assembly to the C Rail trolley body with the
cross-slot Small head Screw M6x20, ensuring the
4x screws are tight but not over tightened.
Tie the rope to the disengagement leaver.
3.4.3
Lifting Plate Connection
Connect lifting plate as shown in Figure 9,
L is about 100mm, keep bolts loose, in order to adjust the L
length.
3.5
Fitting the opener
3.5.1
Installing the front header bracket
As shown in Figure 10, determine the installation
location of the front header bracket and fix firmly in position.
3.5.2
Install perforated angle for opener head
Cut a piece of perforated angle (400-450mm) and fix firmly
to the ceiling keeping it centered of the door opening.
Figure 7
Figure 9
~
Figure 8
M8x20
M8
Figure 10
