www.conquerordoors.com
7
3.
Briefly press
+
or
–
to adjust the closing sensitivity from 0 to 9 (default
3
)
4.
Press
P
to confirm and enter the next setting
•
Safety Beam Setting
1.
Press & Hold button
P
until A is displayed
2.
Scroll to using P button
3.
Briefly press
+
or
–
to set the safety beam from 0 to 2 (default
0
)
0
: No Safety beam,
1
: Activate safety beam during door closing,
2
: Activate safety beam during
door closing and opening
4.
Press
P
to confirm and enter the next setting
•
Auto Closing Time
1.
Press & Hold button
P
until A is displayed
2.
Scroll to using
P
button
3.
Briefly press
+
or
–
to set the auto closing time from 0 to 9 minutes (default
0
)
4.
Press
P
to exit
•
Transmitter Code Learning
1.
Press & Hold button
–
until is displayed
2.
Press a transmitter button once, ‘.’ slowly flashes
3.
Press the same transmitter button once again, ‘.’ quickly flashes for 2 seconds and off
•
Transmitter Code Deleting
1.
Press & Hold button
–
until appears, keep hold button
–
until ‘.’ Disappears
2.
Release the button, all the transmitter codes is deleted.
•
Transmitter Button Function Setting
1.
Press & Hold button
P
until is displayed
2.
Briefly press
+
or
–
to set the transmitter button function from 0 to 2 (default:
1
)
0
: Tx button A is for opening the door, Tx button B is for closing the door
1
: One Tx button controls the door
