3. ASSEMBLY
Machine can be assembled in minutes by one person. Screws and nuts only need to be tightened with
wrench (part G). When assembling the machine follow these instructions:
(1). Insert 2 screws (part I) in the larger “U” bar
(part D). Place washers (Part J) and nut (Part
H), screw (Part I) on and tighten with wrench
(Part G).
(2). Insert 2 screws (Part I) in the small “U” bar
(Part E). Place washers (Part J) and nut (Part
H) screw on and tighten with wrench (Part G).
Make sure it’s tightened. See picture.
(3). Release the loose nut (part K) already
attached to the body (Part A) on the fixed screw
at the base of the foot and insert the rounded tip
of chain into the fixed screw. Tighten the nut
using wrench (Part G). See picture.
(4). Remove safety pin (Part F). See picture.
EMAIL:
WEB: help.conquerequipment.com TEL: 8553494327
