Connect-Tek Over IP
3
▓
Chapter 2 Your First-Time on CTIP-01
A. Quick Start Guide
For this Quick Start Guide, we offer three different easy step-by-step ways, letting you setup this unit very
easily and quickly.
Before doing the initial setting:
•
Please record your original computer settings such as TCP/IP setting in case you would like to
have this computer for other use.
•
Please make sure the latest Java software downloaded at http://www.java.com.
•
Please disable mouse acceleration on the host Computer and client computer, refer to more
detailed information in Section C of Chapter 2.
Hardware Necessary for this Quick Start Guide
•
A CTIP-01 unit with a power adapter
•
A hub with a power adapter
•
A computer with a keyboard, mouse, and monitor
•
2 CAT-5 cables with RJ-45 connectors
•
A DB9 RS-232 null modem cable or a DB9 RS-232 straight-through cable
1.
If you don’t have DHCP (Dynamic Host Configuration Protocol)
Step 1
. Connect the CAT-5 cable to the
WAN
port on the rear panel of
CTIP-01
. And, connect the opposite
end of the CAT-5 cable to the hub. Another CAT-5 cable connects the hub with the computer.
Step 2
. Set the IP address of a computer connected on the same network as
CTIP-01
to a similar unused
address like
192.168.1.124
and the subnet mask of
255.255.255.0
.
Under Windows XP Environment
a
. Click “
Start
”, then right click on “
My Network Places
”, and then select “
Properties
”. You will get the
following screen:
