Copyright
©
2016
congatec
AG
IA40m12.indd
73/97
Feature
Options
Description
Fan Hysteresis
0 -
7
Set number of degrees for the temperature to decrease before the fan is switched off again.
8.4.17
SATA Submenu
Feature
Options
Description
SATA Controller
Enabled
Disabled
Enable or disable SATA onboard SATA controller(s).
SATA Mode Selection
AHCI
Select SATA controller mode.
SATA Interface Speed
Gen1
Gen2
Gen3
Select SATA Interface Speed.
Note:
CHV A1 always with Gen1 Speed.
SATA Test Mode
Enabled
Disabled
Enable only during verification measurements.
Aggressive LPM Support
Enabled
Disabled
Enable PCH to aggressively enter link power state.
►
Software Feature Mask
Configuration
Submenu
SATA Port 0
Enabled
Disabled
Enable or disable SATA port 0.
Spin Up Device
Enabled
Disabled
If enabled for any ports, staggered spin up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin up at boot.
Device Sleep Support
Enabled
Disabled
Enable or disable device sleep support on that port.
SATA Port 1
Enabled
Disabled
Enable or disable SATA port 1.
Spin Up Device
Enabled
Disabled
If enabled for any ports, staggered spin up will be performed and only the drives which have this option
enabled will spin up at boot. Otherwise, all drives spin up at boot.
Device Sleep Support
Enabled
Disabled
Enable or disable device sleep support on that port.
8.4.17.1
Software Feature Mask Configuration Submenu
Feature
Options
Description
HDD Unlock
Enabled
Disabled
If enabled, indicates that the HDD password unlock in the operating system is enabled.
LED Locate
Enabled
Disabled
If enabled, indicates that the LED/SGPIO hardware is attached and ping to locate feature is enabled on
the OS.