Copyright
©
2016
congatec
AG
IA40m12.indd
93/97
Feature
Options
Description
7th Boot Device
Disabled
SATA 0 Drive
SATA 1 Drive
NVMe Storage
USB Harddisk
USB CDROM
Other USB Device
Onboard eMMC Storage
Onboard LAN
External LAN
Firmware-based Bootloader
Other Device
8th Boot Device
Disabled
SATA 0 Drive
SATA 1 Drive
NVMe Storage
USB Harddisk
USB CDROM
Other USB Device
Onboard eMMC Storage
Onboard LAN
External LAN
Firmware-based Bootloader
Other Device
Battery Support
Auto (Battery Manager)
Battery-Only On I2C Bus
Battery-Only On SMBus
Battery system support selection. Select 'Battery-Only On I2C Bus' for battery-only systems using I2C bus
and 'Battery-Only On SMBus' for battery-only systems using SMBus. Select 'Auto' for systems equipped with
a real battery system manager (connected via I2C or SMBus).
Auto (Battery Manager).
UEFI Screenshot
Capability
Disabled
Enabled
If Enabled, you can press LCrtl+LAlt+F12 to take screenshot from current screen. It will be saved as PNG
image on the first writable FAT32 partition found.
New Boot Option Policy
Default
Place First
Place Last
Controls the placement of newly detected UEFI boot options.
Note
The term ‘AC power loss’ stands for the state when the module looses the standby voltage on the 5V_SB pins. On congatec modules, the
standby voltage is continuously monitored after the system is turned off. If within 30 seconds the standby voltage is no longer detected, then
this is considered an AC power loss condition. If the standby voltage remains stable for 30 seconds, then it is assumed that the system was
switched off properly.