Copyright
©
2016
congatec
AG
IA40m12.indd
90/97
8.7.1
Boot Settings Configuration
Feature
Options
Description
Setup Prompt Timeout
Default:
1
0 - 65535
Set number of seconds to wait for setup activation key.
‘65535’ - Waits indefinetly (0xFFFF).
‘0’ - Does not wait (not recommended).
Bootup NumLock State
On
Off
Set the keyboard numlock state.
Quiet Boot
Disabled
Enabled
‘Disabled’
- Displays normal POST diagnostic messages.
‘Enabled’
- Displays OEM logo instead of POST messages.
Note:
The default OEM logo is a dark screen.
Enter Setup If No Boot
Device
No
Yes
Select whether the setup menu should be started if no boot device is connected.
Enable Popup Boot
Menu
No
Yes
Select whether the popup boot menu can be started.
Boot Priority Selection
Device Based
Type Based
Set boot priority:
‘Device Based’ - Set boot priority from a list of currently detected devices.
‘Type Based’ - Set boot priority from a list of device types even if they are not connected yet.
Boot Option Sorting
Method
Legacy First
UEFI First
Set boot option sorting method:
‘Legacy First’ - Tries all legacy boot option first before first UEFI boot option.
‘UEFI First’ - Tries all UEFI boot options before first legacy boot option.
Power Loss Control
Remain Off
Turn On
Last State
Select the mode of operation if an AC power loss occurs:
‘Remain Off’ -
Keeps the power off until the power button is pressed.
‘Turn On’ -
Restores power to the computer.
‘Last State’ -
Restores the previous power state before power loss occurred.
Note:
Please chose an ATX type power supply if you want to use this feature.
AT Shutdown Mode
System Reboot
Hot S5
Select the behavior of an AT-powered system after a shutdown.
System Off Mode
G3/Mech Off
S5/Soft Off
Select the system state after a shutdown if a battery system is connected.
Fast Boot
Disabled
Enabled
Enable this feature to boot with a minimum set of devices.
Note:
This feature has no effect on BBS / legacy boot options.
