Condux Gulfstream 350, Руководство пользователя и инструкция по безопасности

Страница: 33 / 38

33
PREPARATION FOR STORAGE
13.
!WARNING: Air Block Assembly contains compressed air when blower isoperated.
Opening Air Block while under pressure may cause serious personal injury. Ensure
blower is depressurized before removing Air Block cover.
A. REMOVE POWER FROM UNIT
1. Pull Button to Raise Tractor Drive. (Figure 66)
2. Turn off compressed air by closing the Air Control Valve at the blower. (Figure 67)
Shut off air at the compressor and decompress air hose. Depressurize the air block
exhaust by turning the air control valve to the 3 o’clock position. (Figure 68) Remove
air hose when system is relieved of pressure.
3. Disconnect battery.
B. REMOVE CABLE FROM BLOWER
1. Open Air Block Cover and remove Cable Seals. (Figure 69)
2. Take out entry guides as you take the fiber out from the side.
C. SEPARATE UNIT FROM CONDUIT
1. Open Conduit Clamp.
2. Pull duct and fiber away from unit.
3. If repositioning the machine, the GS 350 should not be parked on a slope in excess
of 13°.
Figure 66. Raise Tractor Drive
Figure 69. Open Air Block
Figure 67. Turn Off Air
Figure 68. Depressurize Air Block