Condux Gulfstream 350, Руководство пользователя и инструкция по безопасности

Страница: 8 / 38

8
2.
A. CONDITION OF USE
Temperature from 21° F ( -6° C) to 110° F (+43° C)Humidity from 30% to 90% +/- 5%
Weather conditions relevant to working conditionsNatural and/or artificial lighting of
the work site, minimum 200 lux
B. AIR COMPRESSOR REQUIREMENTS
• Pneumatic Pressure: 215 psi (15 bar) Maximum
• Required Flow Capacity: 35 SCFM(1 m3/min) to 375 SCFM (11 m3/min)
• Conduit Size: 8 mm-1.25" (42mm) OD
• Air coolers are recommended for blowing fiber
• Compressor flow may need to be doubled if blowing distance is greater than 3,500
feet (1,067 meters) for traditional duct
C. OPERATIONAL CAPACITIES
• Pushing Force: 70lbs (310 N) maximum
• Pushing Speed: 330 ft/min (100 m/min) maximum
• Cable Sizes: .1575" to .6299" (4 mm to 16 mm)
• Conduit Sizes: 3/4" - 1.25 " 8 mm, 8.5 mm, 10 mm, 12 mm, 12.7 mm, 14 mm,
16 mm, 18 mm, 25 mm, 27 mm, 32 mm, 36 mm, 37 mm, 40 mm, 42 mm
D. DISTANCE AND SPEED BOX
• Power Requirements: 12 volt Dewalt Battery (not supplied)
• Displays: Distance of Run, Operational Speed
E. PHYSICAL SPECIFICATIONS
• Height: 11.8" (300 mm) • Weight: 56 lbs (28 Kg)
• Length: 23" (338 mm) • Weight with case: 76 lbs (34 Kg)
• Width: 13.3" (338 mm)
F. ACOUSTIC EMISSION
• Level of max. sound pressure to the operator seat (ISO 11202) Lep=85 dB(A)
G. CATERPILLAR DRIVE SPECIFICATIONS
• Maximum pushing force: 70 lbs (310 N), depending on cable diameter
• Maximum pushing speed: 330 ft/min (100 m/min)
• Independent pushing drive belts profiled for cable .1575" (4 mm) to .6299" (16 mm)
• Side guards.
• Adjustable air clamp force 0 - 12.5 lbs/in(2.2 N/mm)
H. CONDUIT COUPLING REQUIREMENTS
• Must withstand maximum air pressure of 215 psi (15 bar).
• Must withstand axial loading and vibration.
• Must be screw type, compression type, or fusion type.
• Must fit snugly.
• Conduit ends must be cut off squarely and deburred.
• Conduit must be fully seated into the coupler.
• Couplers should be installed in a straight section of conduit.
• Must be same size as conduit.
TECHNICAL INFORMATION