Installation Instructions
Positioning module
Conductor rail program 0832, C-rail,
Console, ProShell
MV0800-0015a-EN
www.conductix.com
translated document
Page 6 of 23
2.2.2
Clipping in the band holder
2.2.2.1
Installation in support profile
Fastening to the support profile is done by threading the band holder into the gap in the tubular profile area and then turning it until
the hook clips into the area of the C-slot:
Fig. 2: Clipping the hook into the C-slot
Fig. 3: Hook clipped into C-slot
2.2.2.2
Installation on insulation profile
Fastening to the insulation profile is done by pressing the band holder into the lowest pole of the insulation profile. Make sure that
the band holder does not cover the poles above it:
Fig. 4: 1. Insert band holder and 2. clip/press the band holder in
Fig. 5: Incorrect band holder arrangement
