Installation Instructions
Positioning module
Conductor rail program 0832, C-rail,
Console, ProShell
MV0800-0015a-EN
www.conductix.com
translated document
Page 21 of 23
6.3
Applying the positioning band
Observe the manufacturer's instructions (Leuze) when installing the positioning band. The positioning band profile can be supplied
in the following variants:
No positioning band
With (loose) positioning band (not affixed in place)
With positioning band profile (already affixed)
Stick the positioning band onto a clean, grease-free strip.
The following situations can occur at a defined starting point (start of lane / code 0) (in each case with a view to the conductor
rail/positioning band):
6.3.1
Lane start on left
Standard coding from 0 and ascending to the right. Labeling/numbering visible on bottom.
Fig. 34: Lane start on left
6.3.2
Lane start on right
Positioning band reversed with the labeling/numbering on top
not readable, because upside down
Fig. 35: Lane start on right
