Condair RS series Скачать руководство пользователя

Страница: 22 / 80

Receiving and storage

Receiving and storage

4.1

Inspection

After receiving:
– Inspect shipping boxes for damage.

Any damages of the shipping boxes must be reported to the shipping company without delay.

– Check packing slip to ensure all parts has been delivered.

All material shortages are to be reported to your Condair supplier within 48 hours after receipt of the

goods. Condair Group AG assumes no responsibility for any material shortages beyond this period.
The standard delivery includes:
– Condair RS steam humidifier equipped with the options ordered according

chapter 3.3

, packed

in cardboard box with:

– Fastening set

– Installation manual (this document), operation manual and spare parts list

– Water drain hose with hose clamp

– Supply cable between Module A to Module B (for double units and Linkup systems only)

– Data cable between Module A to Module B (for double units and Linkup systems only)

– Linkup cable between "Main A" and "Externsion"A" (for Linkup systems only)

Note: the supply cable, the data cable and the Linkup cable are supplied in the box of main unit A.

– Ordered accessories with manual according

chapter 3.4

, packed separately.

– Unpack the parts/components and check for any damage.

If parts/components are damaged, notify the shipping company immediately.

– Check whether the components are suitable for installation on your site according to the unit data

stated on the specification label.

Содержание RS series

















































































Результаты поиска

Содержание RS series

Отзывы:

Похожие инструкции для RS series

Бренды по названию

Популярные бренды

Condair RS series, Руководство по установке

Результаты поиска

Содержание RS series

Отзывы:

Похожие инструкции для RS series

Бренды по названию

Популярные бренды