Condair HumiLife RH Series, Руководство по эксплуатации

Страница: 13 / 32

User Interface
Condair RH
2594949_B_EN_2005_Condair-RH_OM
User Interface | 13
The humidifier has a power button that:
l
Turns the unit on/off
l
Drains the unit
l
Connects to the wireless network
l
Resets fault warnings
Aside from the power button, the humidifier is controlled using the Condair Humilife app.
The humidifier has four LEDs that indicate the status of the humidifier:
power wireless cylinder warning/error
Description
Blue Humidifier is on (operational).
Fading (Blue) The unit is on standby. The humidifier will product steam when the humidity is lower than the
setpoint (defined in the Condair HumiLife app).
(Red) The unit is on standby. The humidifier is disabled through the Condair HumiLife app. The
humidifier will not humidify unless it is re-enabled through the Condair HumiLife app.
Blinking Security loop is open (W2).
Red Humidifier is not on. It is still connected to the power supply.
Description
Blue Wifi/Cloud/Hostpot connection established.
Green Hotspot (AP) mode activated. The humidifier is connected to your phone.
Fading (Blue) The software in the humidifier is updating.
(Green) The humidifier is in Hotspot (AP) mode. The humidifier is attempting to connect to your
phone.
Red No Wifi connection (W6).
Description
Blue Cylinder OK.
Blinking Cylinder is draining.
Fading Cylinder is filling. Appears on first fill cycle on a new cylinder.
Yellow Cylinder end of life approaching expiry (W5). Replace soon.
Red Cylinder end of life reached (E5).
Invalid cylinder installed (E6).