Condair DRAABE HighPur, Инструкция по установке и эксплуатации

Страница: 31 / 44

31 Maintenance
8.2 Maintenance
Areas with significant dust and/or dirt build-up can block the ventilators and impede the nebulizer's
function. This should be checked and the pollution should be removed where necessary.
CAUTION!
Cleaning
Do not clean with water or cleaning products of any kind. Use a damp cloth or a brush for cleaning.
8.3 Replacement of nozzles
To replace a high-pressure nozzle, first ensure that the high-pressure system has been switched off and
that the high-pressure line has been relieved. Also make sure that the power supply to the control unit
has been disconnected, if you disconnect the device from the supply line.
CAUTION!
Risk of damage
When replacing the nozzle, avoid contact with the filter insert and nozzle opening. These could possibly
be damaged during contact.
Replacement procedure
• Unscrew the nozzles from the atomizer using the supplied nozzle wrench.
• Have a bucket ready to catch the escaping water.
• Screw in the new nozzles. Only use the nozzle wrench supplied for this purpose. Ensure that the
nozzle is inserted with the seal!
• Restart the system and check the spray pattern.
NOTE!
Returning used nozzles
The used nozzles must be returned to the Condair sales partner in the packaging of the nozzle set.