Concurrent Technologies PP 110/01 Series Скачать руководство пользователя страница 103

Страница: 103 / 122

10.5

CompactPCI Bridge Configuration

The BIOS provides Setup menus that allow configuration of certain features of the HiNT

HB6

CompactPCI Bridge, these can be found under the

CompactPCI

top level menu. The fields

available via Setup depend on the board’s operating mode.

10.5.1 System Controller Mode

In System controller mode only one Setup option is provided. This allows the user to specify

whether the CompactPCI ENUM interrupt drives NMI or a selectable IRQ via a PCI bus interrupt

(Section 10.4.1 describes how to select the IRQ).

10.5.2 Satellite Mode

In Satellite mode the board does not connect to the CompactPCI interface, therefore no Setup

menu is provided.

10.5.3 Peripheral Mode

When the board is configured for peripheral mode operation, the BIOS provides two sub-menus

for configuring the upstream and downstream windows of the HB6 bridge.

10.5.3.1 Upstream Windows

Upstream windows give the peripheral mode PP 110/01x board access to resources on the

CompactPCI bus. The HB6 bridge provides three upstream windows: upstream window 0 can

map either memory or I/O addresses; windows 1 and 2 are for memory addresses only.
The BIOS Setup menu allows the user to specify the size of each window and the CompactPCI

address that will be accessed via the window. The local address of the window is configured

automatically by the BIOS.

NOTE

The local address of upstream windows is not fixed and may change if the board

configuration is modified. Application software should always read a window’s

base address from PCI configuration space.

10.5.3.2 Downstream Windows

Downstream windows give devices on the CompactPCI bus access to resources on the

peripheral mode PP 110/01x board. The HB6 bridge provides three downstream windows:

downstream window 0 can map either memory or I/O addresses; windows 1 and 2 are for

memory addresses only.
The BIOS allows the user to specify the size of each window and the local address that will be

accessed via the window. The System Controller assigns the window’s address on the

CompactPCI bus.

10-8

PP 110/01x

PC BIOS

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PP 110/01 Series



























































































































Результаты поиска

Содержание PP 110/01 Series

Отзывы:

Похожие инструкции для PP 110/01 Series

Бренды по названию

Популярные бренды

Concurrent Technologies PP 110/01 Series, Техническое справочное руководство

Результаты поиска

Содержание PP 110/01 Series

Отзывы:

Похожие инструкции для PP 110/01 Series

Бренды по названию

Популярные бренды