Concept2 MNV6560, Руководство пользователя

Страница: 82 / 84

EN
80 MNV6560
Check the amount
of regenerative
salt
According to signalisation on the panel
Fill rack with
dishes
Put dishes cleared of large leftovers in rack
Select a program Select the required program by pressing the „P“ pushbutton
Start the
dishwasher Check whether the water tap is open; close the dishwasher door Dishwashing starts
automatically in 10 seconds
Program change
possibility
1. Carefully open the dishwasher door (danger of hot water/steam scalding)
2. Discontinue the running program by pressing the „P“ pushbutton for more than 3 seconds
3. Select and set up the newly required program by pressing the „P“ pushbutton
4. Check whether dishwashing detergents are in the container
5. Close the dishwasher door; the program starts in 10 seconds
Forgotten
dishes insertion
possibility 1. Carefully open the dishwasher door (danger of hot water/steam scalding)
2. Insert forgotten dishes
3. Close the dishwasher door; the program starts in next 10 seconds.
Power supply
failure
1. Carefully open the dishwasher door (danger of hot water/steam scalding)
2. Select and set up the newly required program by pressing the „P“ pushbutton.
3. Check whether dishwashing detergents are in the container
4. Close the dishwasher door; the program starts in 10 seconds
Once the program
is over, turn off
the dishwasher. The program end is signalled acoustically Carefully open the dishwasher door
(danger of hot water/steam scalding); then turn the dishwasher off by pressing the
main switch
Final steps
Close the water supply tap; let dishes cool off for at least 15 minutes (danger of
burning by hot dishes); then remove dishes from the dishwasher
P
QUICK GUIDE THROUGH INSTRUCTIONS FOR USE – CONCEPT
– MNV6560 DISHWASHER
These instructions are designed as the compendious description; detailed information is contained in the Instructions for Use.
Turn on the
dishwasher
Open the door and press the main switch
Fill the container
with the
dishwashing
detergent
Compartment 1 - for washing - always
Compartment 2 - just for pre-washing programs
Check the rinse
aid 1. Visually = by means of the indicator on the container
2. According to signalisation on the panel
2 1