92
EN
IDV1460
3. To unlock the control panel, press and hold the child lock activation / deactivation symbol (3) for 3 seconds.
4. The “
Lo
” symbol disappears and the control panel is active again.
Note:
•
If the induction hob is switched off while the child lock function is activated, the control panel lock is active even
after the induction hob has been switched off. In this case the child lock is activated when the induction hob is
switched on and the “
Lo
” symbol is displayed on the control panel.
•
For unlocking the control panel press and hold the symbol for activation/deactivation of the child lock (3) until the
acoustic sound goes off. The “
Lo
” symbol disappears and the control panel is active again.
Setting the cooking time (timer function)
This function can be set only when the cooking zone has not been selected.
1. Press the timer setting button (3). The timer will show “10” and “0” will flashes.
2. Use the “-” and “+” buttons to set the desired time on the timer display in one-minute steps. To set the time in ten
minute push again timer setting button (3) and then will flash desired time on the timer display in ten-minutes
steps. Use the “-” and “+” buttons to set the required tens of minutes.
3. To cancel the set cooking time, set the value on the timer “00” with the “-” button. “-” appears on the display.
4. After the set cooking time has elapsed, the “- -” symbol appears on the display and acoustic sounds will be heard
for 30 seconds.
Note:
The minute minder function only works if the hob is in use - ie. it is not necessary to select a specific cooking zone for
the setting, but it is necessary to cook on some of the cooking zones.
Otherwise, the board will turn off automatically after 1 minute, so the beep will not sound at the minute. This function
is set on the boards for better energy efficiency.
Delayed shut down function of one cooking zone
The delayed shut down function can be used for all the cooking zones of the induction hob. For each cooking zone,
different delay times can be set.
1. Press the cooking zone selection button (4) for which you want to use the delayed shut down function.
2. Press the timer button (3). The display shows the “10” above the buttons and the number „0“ starts flashing starts
flashing.
3. Use the “-” and “+” buttons to set the desired time on the timer display in one-minute steps. To set the time in ten
minute push again timer setting button (6) and then will flash desired time on the timer display in ten-minutes
steps. Use the “-” and “+” (2) buttons to set the required tens of minutes.
4. After the delayed shut down time is set dot in the lower right corner will flash in addition to the selected power
level of the selected cooking zone.
5. To cancel the set cooking time, set the value on the timer “00” with the “-” button. The “-” symbol appears on the
display.
6. After the set delayed shut down time has elapsed, the “- -” symbol appears on the display and the selected cooking
zone, for which the delayed shut down was set, will shut down automatically.
Delayed shut down function for multiple cooking zones
To set the delayed shut down for multiple cooking zones, proceed as in setting the delayed shut down of one cooking
zone.
1. Press the cooking zone selection button (4) for which you want to use the delayed shut down function.
2. Press the timer button (3). The display shows the “10” above the buttons and the number „0“ starts flashing starts
flashing.
3. Use the “-” and “+” buttons to set the desired time on the timer display in one-minute steps. To set the time in ten
minute push again timer setting button (6) and then will flash desired time on the timer display in ten-minutes
steps. Use the “-” and “+” (2) buttons to set the required tens of minutes.
4. After the delayed shut down time is set dot in the lower right corner will flash in addition to the selected power
level of the selected cooking zone.
