MOTOR FILTER CLEANING AND REPLACEMENT
1. Disconnect the fl exible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access
the motor fi lter more easily.
3. Remove the motor fi lter (fi g. 6). You can clean the fi lter by tapping
and shaking. If the fi lter is heavily soiled, you can wash it in
lukewarm water and let it dry properly.
4. Insert the cleaned or new motor fi lter into the appliance and close
the cover.
CLEANING AND REPLACEMENT OF THE AIR OUTLET FILTER
Remove the air outlet fi lter. This type of vacuum cleaner is equipped with an H.E.P.A. fi lter in the outlet (Fig.
7), which is capable of catching even very fi ne dust particles. You can clean this fi lter by tapping and shaking,
and then with a soft brush. After this operation is complete, you can clean a very dirty fi lter by washing and
rubbing with a soft brush in lukewarm water without any cleaning agents added. It is
important
to let the
wet parts dry thoroughly.
A wet fi lter would get damaged by vacuum cleaning!
Do not use a hair dryer for
drying!
Note
: Wet cleaning may cause more wear and tear of the fi lter and, consequently, shorten its service life.
TROUBLESHOOTING
Problem
Cause
Solution
Motor does
not run.
Plug inserted into the mains outlet
incorrectly or insuffi
ciently.
Check the plug connection.
The mains outlet is not live.
Check for voltage, e.g. by connecting
another appliance.
Motor has
stopped
operating.
Improper or insuffi
cient air fl ow.
Motor overheating fuse activated.
Disconnect the cable from the socket.
Check and release the air suction
and discharge holes; check the fi lter’s
cleanliness and/or replace the dust bag.
Let the vacuum cleaner cool down.
Front cover
cannot be
closed
Dust bag inserted incorrectly.
Check the dust fi lter installation.
Reduced
suction power
Dust bag full or clogged.
Replace the dust bag.
Obstructed fi lter.
Clean or replace the fi lter.
Clogged nozzle, tube, or hose.
Check and clear the air passage on the
suction and discharge sides.
Vacuum
cleaner heats
up
Slight heating of the vacuum cleaner is normal and cannot be considered a failure.
fi g. 7
EN
37
VP 8220n
Содержание HOME CAR PET
