Concept2 HOME CAR PET, Руководство пользователя

Страница: 35 / 64

OPERATING MANUAL
ASSEMBLY OF THE VACUUM CLEANER
NOTE: Always disconnect the plug from the mains outlet prior to
mounting or removing accessories!
1. Connecting the fl exible hose to the appliance
Insert the fl exible hose into the appliance‘s air suction inlet.
Continue pushing until you hear a clicking sound, which indicates
that the correct position has been reached.
For removing the fl exible hose, press both stopper buttons and
remove the hose (fi g. 1).
The suction power can be controlled manually on the hose handle
with a slide throttle.
When the slide throttle is closed, the air fl ow is stronger.
Slide throttle in open position - weaker air fl ow.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the fl oor attachment to the telescopic tube
Insert the telescopic tube into the fl oor attachment and turn it
slightly.
The fl ap (fi g. 2) is used for setting the fl oor attachment to brushing
(for smooth fl oors), or to smooth vacuuming (for carpets).
ACCESSORIES
1. Slot nozzle
The slot nozzle adapter is used for vacuum cleaning the places accessible with diffi culty, such as radia-
tors, slots, corners, pedestals, spaces between upholsteries, and others.
2. Upholstery nozzle with a detachable brush
This upholstery nozzle attachment is used for smaller upholstery areas. The detachable brush is used for
vacuum cleaning shelves, books, furniture and others.
APPLIANCE USE
Before using the appliance, make sure that the fi lters and the dust collection bag are properly positioned
and mounted. Unwind the supply cable length you need. The yellow mark on the supply cable indicates the
optimum cable length. Do not unwind the supply cable beyond the red mark!
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
3. Set up the suction power you need using the slide throttle.
4. After you have fi nished vacuum cleaning, switch the appliance off and disconnect it from the electric
voltage socket.
5. For winding the supply cable up, press the wind button with one hand and hold the supply cable with
the other hand to avoid its uncontrolled movement.
fi g. 1
fi g. 2
EN
35 VP 8220n