Concept Pro VXH264-4, Руководство пользователя

Страница: 33 / 60

30
CONFIGURING THE VXH264
EVENT / SENSOR
To set-up the event handling options, highlight EVENT/SENSOR and press ENTER.
EVENT / SENSOR: HDD EVENT
The VXH264 can monitor the hard drives and detect problems that may be developing.
S.M.A.R.T. ALARM: Enables SMART disk monitoring.
CHECK INTERVAL: Can be adjusted as desired.
DISK FULL EVENT: Can be set as ON or OFF.
EVENT / SENSOR: ALARM INPUT
Determines the behaviour of each of the 4 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled.
TYPE: Alarm inputs can be set as normally open or normally closed.
TEXT: Allows the indivdual alarm to be named. This name will appear in the log.
EVENT / SENSOR: ALARM OUT
Determines the behaviour and actions that will trigger the relay output.
Behaviour settings
OPERATION: The selected alarm output can be enabled or disabled.
MODE: Can be either TRANSPARENT (the output is active only when the trigger criteria is
present) or LATCHED. (the output is active for a set period of time after a trigger)
DURATION: In LATCHED mode, the time that the alarm output remains active after it has been
triggered.
TYPE: Can be set to low (0V to +5V when activated) or high. (+5V to 0V when activated)
HDD EVENT: Determines whether a hard drive event triggers the alarm output.
Action settings
ALARM: Determines whether alarm inputs will trigger the alarm output.
VIDEO LOSS: Determines whether video loss on any of the selected channels will trigger the
alarm output.
MOTION: Determines whether motion detection on any of the selected channels will trigger the
alarm output.
Press APPLY to save settings.