Concept Pro VXH264-4, Руководство пользователя

Страница: 18 / 60

15
TELEmETRY CONTROL
TELEmETRY cONTROL
Speed domes and other telemetry devices connected to the VXH264, can be fully controlled from the front
panel.
In live display mode, press the PTZ button. To select a camera to control, use the CHANNEL
SELECTION buttons.
When PASSWORD is set to ON only authorised users or ADMIN users can control the PTZ.
Pan and tilt movement is controlled by the CURSOR KEYS . Zoom is controlled by turning the SHUTTLE
wHEEL .
SCR mode & search buttons control the focus far and near.
Press the PTZ button to increase the preset number and the HOLD button to decrease.
Press PAUSE to program the preset, or ENTER to call an existing preset.
Press RETURN to exit PTZ mode and return to live view.
SHUT dOwN SEQUENcE
pANIc REcORdING
Panic recording will override all standard recording settings, PANIC
record settings are configured in the recording set-up. (Page 36)
Press the
CURSOR KEYS to hightlight the REC button on the status
bar, then press ENTER.
Press the PANIC button. The top right of the display shows a red P
to indicate that the VXH264 is in panic recording mode. Press the
PANIC button again to return to normal recording mode.
Use the CURSOR KEYS to highlight the DISP button on the status
bar. Use the CURSOR KEYS to select sequence and press
ENTER . Each channel is shown in full screen for a set period of
time (default 5 seconds) before switching to the next channel. To
stop the sequence press any channel key.
More complex sequences can be programmed through the setup
menu. (Page 22)
Only an operator with ADMIN rights can shut down the VXH264.
Use the
CURSOR KEYS to select on the status bar. Press
ENTER . Use the cursor key to select POwER OFF then ENTER
key. You can then enter the default password ‘1234’ and press
ENTER .
The VXH264 shuts down and emits two beeps to indicate that power
can be safely removed.