Concept Pro VXH264-4, Руководство пользователя

Страница: 37 / 60

34
RECORDING
RESOLUTION: Recording resolutions of CIF (352x288), 2 CIF(704x288) or D1 (704x576) can
be selected for each channel.
FPS: Frame rates between 1 and 25 can be set for each channel.
QUALITY: Five different picture recording qualities can be set for each channel.
AUDIO: If audio devices are connected to the VXH264 then you can select them to be ON or
OFF.
During playback, when a particular channel is selected in full screen, the assigned audio
channel will be played back at the same time.
Adjust values as desired and select OK to finish and return to the parameter menu. Other time
periods can be configured in the same manner.
Remember that if SCHEDULE
mODE is set to wEEKLY, recording
settings need to be changed for
each day as well as for each
particular time.
The default settings for all
channels is CIF (352 x 288), 25FPS,
HIGHEST quality.
Note: The VXH264 supports a maximum recording rate across all channels of 100
frames per second at 2CIF (704 x 288) resolution. As settings are adjusted, the
‘frames available’ at bottom right displays the number of available frames still
remaining and must always be zero or higher.
If, whilst changing recording settings, this figure becomes negative, recording
resolutions and / or frame rates must be lowered to increase the ‘frames available’
value to zero or above.
SCHEDULE
To change SCHEDULE settings, highlight CONTINUOUS/MOTION RECORDING and press
ENTER . Use the CURSOR KEYS to highlight SCHEDULE and press ENTER .
The schedule box is highlighted in blue.
Press ENTER to display the yellow cursor.
Example: To set all channels to motion detection recording only between 18:00 and 00:00.
Use the CURSOR KEYS to move the orange cursor to the 18:00 position and press ENTER .
This becomes the starting position.
Use the CURSOR KEYS to stretch the orange cursor across and down to select all channels
between 18:00 and 00:00.