Conair Thermolator TW-P, Руководство пользователя, Страница: 38 / 136

4-2 I Operation
The TW-S Control
Process Value Display
The window displays the
actual temperature of fluid
entering the “To Process”
line.
Audible Alarm
(Optional)
Setpoint Value Display
The window displays the
fluid temperature setpoint
during normal operation.
Start Button
Press and hold to begin normal operation. The
button lights when the unit is running after vent
cycle has completed.
Note: You must hold the button during entire unit cycle.
Stop Pump Button
Press to stop the Thermolator.
Push again to de-assert and
allow restart.
Status Lights
The lights indicate the
operating status of the listed
components.
= Off or inactive
= On or active
(1): More Cool
(2): Less Cool
(5): Heat
Select Key
Used to edit a parameter or
save a changed parameter.
Raise and Lower Key
Used to enter the setpoint temperature, index through the
operating modes or change other parameter values.
Press
to
increase a value.
Press
to decrease a value.
2
TIP: Press and hold the key for faster scrolling speed.
Run
Press to begin normal
operation.