(D)
(E)
(F)
(G)
←
M A S H . 1
R E V E R S E
→
O V E R R I D E : P R E S S
←
M A S H . 2
R E V E R S E
→
O V E R R I D E : P R E S S
←
R O T O R 1
R E V E R S E
→
O V E R R I D E : P R E S S
T I M E D
A B S
R U N
←
0 0 0 0 0
H O U R S
→
A B S
R U N
←
0 0 0 0 0
H O U R S
→
(B)
(C)
←
R O T O R 2
R E V E R S E
→
O V E R R I D E : P R E S S
Advanced
(H)
(J)
(A)
ST
ART / ST
OP
5:2
UGG050-0517
S Series
Manual reversal of the rotors and/or the Masher-system
5. START / STOP
Information! If the granulator is provided with the
electrical cabinet “Advanced”, the ABS-system enables
the operator to manually reverse the rotor at any time
(and the Masher-system if supplied).
Note! The following instructions only applies to a
granulator with electrical cabinet “Advanced”:
1. Read page 1:3 “Safety rules, During start and opera-
tion”.
2. Start the granulator. >Page 5:1.
3. Press the edit-button “Right” until the desired
message appears. >Page 2:22 figure (D)–(G).
3. Press the OK-button. Note! The rotor / the Masher-
system will keep reversing as long as the OK-button
is depressed.
4. After the reversal is completed, press the edit-button
“Right” until the message “Timed ABS” or “ABS”
appears. Refer to figure (H) or (J).
(A) = Electrical cabinet “Advanced”
(B) = Edit-button “Right”
(C) = OK-button
(D) = Manual reversal, Masher 1
(E) = Manual reversal, Masher 2
(F) = Manual reversal, Rotor 1
(G) = Manual reversal, Rotor 2
(H) = “Timed ABS” is selected
(J) = “Automatic ABS” is selected
