27
COMUNELLO
®Copyright 2019 - All rights reserved
ENGLISH
DIP SWITCH SW1
The SW1 Dip-Switches allow you to select the 1 or 2 motor
M\UJ[PVUHUKKLњUL^OPJOVM[OL[^VTV[VYZZ[HY[ZњYZ[HUK
which second.
TRIMMER SENS:
It regulates the SENSITIVITY of motors
1
1
ON
2
MOTOR
NOT
CONSID.
2
MOTORS
MOTOR
2 DELAY
2
MOTORS
MOTOR
1 DELAY
1
ON
2
1
ON
2
SW1
SW1
SW1
Turning with a screwdriver towards the + increases the sensitivity
and therefore the motor will block its stroke more quickly if an ob-
stacle is detected.
DIP SWITCH SW2
The SW2 Dip-Switches allow to change the direction of stro-
ke of each motor without physically intervening on the electri-
cal connections in the terminal block.
TRIMMER FORCE:
It regulates the FORCE of motors
INV
1
ON
2
OFF
INV
OFF
INV
MOT 1
INV
OFF
INV
OFF
INV
MOT 2
INV
MOT 1
INV
MOT 2
1
ON
2
1
ON
2
1
ON
2
SW2
SW2
SW2
SW2
Turning with a screwdriver towards the + increases the motor
force.
TRIMMER SLOWING:
It regulates the slowdown speed of motors
;\YUPUN^P[OHZJYL^KYP]LY[V^HYK[OLTVKPњLZ[OLTV[VYZ[YVRL
speed during deceleration in 3 STEPS
Vel.Min.
Vel.Med.
Vel.Max.
CAUTION: DS1, DS2 and STOP/8K2 are bridged by the factory. To connect the photocells, the stop button and the edge sensors, it is
necessary to remove the jumper from the terminal.
