32 - Preparing the DeviceMaster for Configuration
DeviceMaster PNIO | UP User Guide
: 2000639 Rev. A
Preparing the DeviceMaster for Configuration
5.
Click
Yes
to upload the firmware.
6.
Click
OK
to the advisory message about waiting until the DeviceMaster is on-
line and in the next minute the DeviceMaster unit or units should display
ON-
LINE
in the
Status
field.
7.
Go to the appropriate
Quick Start
or
User Guide
for your protocol for
information about configuring the serial port or ports using the web page and
programming your PLCs. See
Locating Software and Documentation
12 to locate the document for your protocol.
If you are planning on installing multiple DeviceMasters, you may want to use
the
Save/Load Configuration File
feature in PortVision DX.
A configuration file can contain network settings and protocol settings. Refer
to the PortVision DX help system for information about saving and loading
configuration files.
8.
After configuring the serial port characteristics and preparing your PLC
programs, you can use the next section in this guide, to attach the serial device
or devices.
Содержание 99531-9
