DeviceMaster PNIO | UP User Guide
: 2000639 Rev. A
Network Menu - 109
Network Menu
Changing Keys and
Certificates
Use the following steps to update security keys and certificates in the
DeviceMaster.
1.
Click the
Network | Keys/Cert
.
2.
Click
Browse
to locate the key or certificate file, highlight the file, and click
Open
.
on Page 107 subsection for detailed information.
3.
Click
Upload
when you return to the
Key and Certificate Management
area.
The key or certificate notation changes from factory or
none
to
User
when the
DeviceMaster is secure.
Changes will not take effect until the DeviceMaster is rebooted.
4.
Click
System | Reboot
to reboot the DeviceMaster.
PROFINET IO Page
The following table explains the options on this page.
Miscellaneous
Setting
Description
Enable channel-
specific diagnostics
If you enable this feature, the DeviceMaster can notify the IO
controller via alarm when an oversize packet is available.
Once enabled, the DeviceMaster sends a diagnostic alarm to
the IO controller when an oversize packet is saved. The alarm
is a channel-specific diagnostic alarm with an error type 4096
(16#1000).
Using the slot information associated with the alarm, the IO
controller can start a record data read instruction to retrieve
the saved packet for a certain port/device. After the packet is
read, the DeviceMaster clears the alarm automatically.
Содержание 99531-9
