43
Chapter 10 SNMP
The CT-510 supports SNMP (Simple Network Management Protocol) and ILMI
(Integrated Local Management Interface).
SNMP: MIBs of MIB II and ADSL Forum TR006 are implemented. The
default settings for read-only/read-write communities are
public
and
private
.
ILMI: The Link Management MIB of the ILMI MIBs is implemented. The
default setting of the ILMI is disabled with the value, 0/16, for VPI/VCI.
Step 1
Enter the
MAIN/CONF/SNMP
menu.
Step 2
Refer to Section 10.1 to set the community parameters and refer to
Section 10.2 to set the trap parameters.
Step 3
Refer to Section 10.3 to set the ILMI.
10.1 Community
Step 1
Enter the
MAIN/CONF/SNMP/COMMUNITY
menu.
Step 2
Enter a parameter in each field.
Read-Only Community: Enter the password for read-only
access.
Read-Write Community: Enter the password for read-write
access.
Step 3
Hold down the Ctrl-S keys to save the parameters.
10.2 Trap
Up to five trap destinations are available in the system.
10.2.1
Add a Trap Destination Entry
Step 1
Enter the
MAIN/CONF/SNMP/TRAP
menu.
Step 2
Select
Add
to enter the
MAIN/CONF/SNMP/TRAP/ADD
menu.
Step 3
Enter a parameter in the following fields:
Version: Select
Version 1
or
Version 2
.
Destination IP: Enter the destination IP address.
Community: Enter a parameter for the community.
Step 4
Hold down the Ctrl-S keys to save the parameters.
Содержание CT-510
Страница 1: ...CT 510 ADSL Router User Manual Version A3 0 June 3 2003 261028 002...
Страница 66: ...65 QUIT...
