Comtrend Corporation CT-510, Руководство пользователя

Страница: 25 / 69

24
4.1.3 ADSL Physical Mode
Enter the MAIN/CONF/SYSTEM menu. In the ADSL Physical Mode field,
press the TAB key to select a physical mode. The following modes are
supported: ANSI (full rate), ANSI (Splitterless), G992_1(G.DMT),
G992_2(G.lite), Auto Mode, and Fast ADSL(Auto).
If Auto Mode is selected, the device can auto-detect the following modes from
the CO side: ANSI (full rate), ANSI (Splitterless), G992_1(G.DMT),
G992_2(G.lite). If the CO side supports Fast ADSL, select Fast ADSL (Auto)
in this field.
The default physical mode is ANSI (full rate).
4.1.4 Console Password Check
To access the device from the console mode, a user name and a password will
be requested. You can disable this function from the
MAIN/CONF/SYSTEM
menu. Select Disabled in the Console Password Check field. To change
the password, refer to Section 4.1.2.
4.1.5 Console Session Timeout
In the Session Timeout field, you can enter the length of time (minute) after
which if there is no activity or operation found in the console session, the
console session would end automatically. The following message displays when
the console session times out.
Session Timed Out
Press ESC to enter console mode configuration...
To disable the function, set the value to zero.
4.1.6 Login Name & Passwords
There are two types of login names: root and user. Root is for the system
administrator with full read-write privileges, and user is for the common user
with read-only privileges. The login names are preset in the factory and
cannot be changed.
Each login name comes with a password. The default password for the system
administrator is Root , and for the common user is user . You can change the
password by entering the MAIN/CONF/SYSTEM menu. On the
MAIN/CONF/SYSTEM menu, assign a new password for the administrator in
the New Administrator Password and Retype Password fields, and assign
a new password for the user in the New User Password and Retype
Password fields .