Comtrend Corporation CT-510, Руководство пользователя

Страница: 12 / 69

11
2.2 Preparing Installation
Make sure the following equipment is ready before installing the CT-510.
• A VT-100 Compatible Terminal –
This terminal is essential to perform the initial configuration of the
CT-510. Normally this is a terminal with VT-100 emulation program,
such as Telix.
• A Console Port Cable to connect to Console port –
An RS-232, DB9-to-DB9 straight through cable is required to connect
the terminal to the unit. The following table lists the pin
assignments of the DB9 console port. Only Pin2, 3 and 5 are used.
Pin Definition Pin Definition
1 - 6 -
2 TD 7 -
3 RD 8 -
4 - 9 -
5 GND
Table 2–1 Pin Assignments of Console Port
• An AC power adapter cord to connect to the Power jack –
A 110 VAC to 12 VAC or 220 VAC to 12 VAC power adapter cord is
shipped with the unit. It is used to provide the necessary power for
the unit’s operation.
• RJ45 10BaseT Ethernet connector cable(s) to connect to 1x –
4x ports
–
An RJ45 LAN connection cable is needed to connect the CT-510 to the
Local Area Network (LAN). Maximum four Ethernet cables are
required for 1x ~ 4x LAN port connection to the Ethernet devices.
The pin assignments of the RJ45 connector are listed below.
Pin Definition Pin Definition
1 RD+ 5 -
2 RD- 6 TD-
3 TD+ 7 -
4 - 8 -
Table 2–2 Pin assignments of RJ45 Port