Comtrend Corporation CT-510, Руководство пользователя

Страница: 36 / 69

35
6.4 Ping Test Utility
The ping test is used to verify the status of the network connection after the
RIP or static route function is enabled. It sends a request message to the host
and waits for a return message. This diagnostic function can verify if the
remote host is reachable for Telnet or FTP purposes. It can also measure the
round-trip time to the remote host.
Step 1
Enter the MAIN/UTIL/PING menu.
Step 2 Enter a parameter in each field.
Host address: Enter the host address of the destination in
the format “aaa.aaa.aaa.aaa,” where aaa is a value
between 1 and 254.
Data Size: Packet size for ping with a value between 32
and 1500.
Times: The number of times that the ping test will be
executed.
Step 3 Hold down the Ctrl-S keys to start the ping test.
Step 4 In a few minutes, the test results will be displayed.
Ping Total: The number of tests performed in total
Ping Success: The number of tests successfully performed
Ping Fail: The number of tests that failed
Ping Average Time (ms): The average round-trip time of
the test
Ping Last Time (ms): The round-trip time of the last ping
test