Operation
MNC-0400-071
Page 5 of 53
Revision 4
Figure 1 - Front Panel Controls and Indicators
The adjust knob is used for adjusting attenuation, power, etc. as well as scrolling through
various menu items. All other controls and indications are done via the touch-screen interface
on the LCD display. The RF sample is a coupled interface of the actual RF being transmitted. The
coupling factors for this interface can be found in the set-up menu described in the following
section. Upon initial turn-on an initial splash screen will be displayed momentarily as shown in
Figure 2. This screen time will vary from approximately 2 seconds to 8 seconds depending on
whether an Ethernet connection is found.
LCD
Touch-screen
Adjust
knob
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
