MNC-0500-038
13 of 28
Revision 2
Amplifier Communication and Protocol, XTRT, Touchscreen TWTA
Event History
Command Byte
: '4'
Response
: A list of the last 100 faults. Each fault string has the following format:
"AAAAAAAA YYMMDD HHMM!"
The first eight bytes describe the fault, and the remaining bytes serve as a time-stamp. Each string is terminated by
'!'; the last string in the sequence is followed by an additional '!'.
Note:
Add additional (4)xxx to retrieve 10 events starting at offset xxx.
Power in dBW
Command Byte
: '6'
Response
: "XX.X" dBW. This is the HPA output power in dBW, as adjusted by the offset factor (entered through
the HPA front panel interface for digital HPAs or adjusted via Controller Command ‘F’, Adjust RF Calibration.)
Power in Watts
Command Byte
: '7'
Response
: "XXXX" Watts. This is the HPA output power in Watts, as adjusted by the offset factor (entered through
the HPA front panel interface for digital HPAs or adjusted via Controller Command ‘F’, Adjust RF Calibration.)
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
