MNC-0300-036
10 of 26
Revision E
Unpacking and Installation
Monitor and Control Connector
To externally control the amplifier a M&C interface is provided. The
connector is a 32-pin MIL style waterproof connector.
The Monitor and Control connector provides these interfaces for the use
of the customer:
•
COM1 — RS-232 Serial Port.
•
COM2 — RS-422/ RS-485 Serial Port.
•
Two sets of Form “C” Relay contacts for Summary Fault indication.
•
External Interlock
•
RF Inhibit Control
•
24 VDC @ 100 mA maximum
•
15 VDC for monitoring purposes only.
•
Hardware Address Select.
Monitor and Control Pinouts
Figure 4 , Digital M&C Connector Pin Layout shows the pin layout and
Table 1 , Digital Monitor and Control Connector J1 Pinouts lists the pinouts
for the typical Digital Monitor and Control Connector on the Antenna
Mount Power Amplifier.
Figure 4, Digital M&C Connector Pin Layout
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
