MNC-0000-041
11 of 34
Revision A
Operation Addendum, HPA Control Utility
Figure 9, Maximum Power Level
8.
Refer to Figure 10. When selected, the Heater Standby option
will reduce the voltage applied to the TWT heater circuit when the
amplifier is in standby mode, which will increase the life of the
tube. If the amplifier is commanded into the transmit mode the
voltage will automatically change to the correct operating voltage
for the heater.
Figure 10, Heater Standby Control
9.
Refer to Figure 11 on page 12. The “Configuration -> Ethernet
Configuration” menu allows the selection of the network Host
and Domain names, and allows configuration of the IP Address
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
