MNC-0000-041
21 of 34
Revision A
Operation Addendum, HPA Control Utility
Figure 23, Maximum Power Level
8.
Refer to Figure 24. The “Configuration -> Ethernet Configuration”
menu allows the selection of the network Host and Domain
names, and allows configuration of the IP Address and the net
mask if “Static IP” is selected. If DHCP is selected, a server on
your network assigns the IP address.
Note
Improper selection of IP addresses in Static IP mode
may affect the proper operation of your Local Area
Network; the use of DHCP mode is strongly advised.
The “MAC Address” item in the upper right corner of the Ethernet
Configuration menu is a unique hardware address for IT use
only.
9.
The next option on the configuration menu is either “Display –
Watts” or “Display – dBm” depending on the current units used
for power. Selecting this option allows you to toggle power units
for Forward Power, Reverse Power, and the Power Alarms.
Toggle to select the display desired.
10.
When selected, the RF Inhibit Invert menu item will cause the RF
Inhibit Option to be inverted.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
