TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
Revision 0
Ethernet-based Remote Product Management
4–13
MN-TRP1000-OD
Webpage Timeout
Use the drop-down list to select the desired time lapse before the TRP1000-4450 Web Server
Interface pages time out as either five minutes or eight hours. The default timeout setting is five
minutes. Click
[Submit]
when done.
The ‘Status | Status’ page (Sect. 4.5.4.4.2) will automatically refresh once every
ten seconds, and will reset the timeout counter.
Click
[Refresh]
to update the page appearance to the current operating configuration.
4.5.4.2.2
Admin | SNMP
Use this page to set and returns administration information for the TRP1000-4450 SNMP feature.
Figure 4-4. Admin | SNMP Page
SNMP
Simple Network Management Operational Status:
Use the drop-down list to select the
Simple Network Management operational setting as
Enabled
or
Disabled
.
The
SNMP Read
and
Write Community String
fields can be any combination of characters
and a length of 0 - 20 characters:
The factory default for the
Read Community String
parameter is
public
.
The factory default Write Community String is
private
.
Enable Authentication Trap:
Use the drop-down list to select the Enable Authentication Trap
operational setting as
Enabled
or
Disabled
.
The Administrator can assign up to two
SNMP Trap
IP
addresses and one
SNMP Trap
Community String.
The
SNMP Trap Community String
field can be any combination of
characters and a length of 0 - 20 characters:
The factory default for the
Trap Community String
is
comtech
.
