TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
Revision 0
Ethernet-based Remote Product Management
4–12
MN-TRP1000-OD
Figure 4-3. Admin | Access Page
Network Maintenance
IP Gateway, IP Address/Range:
Enter the desired IP Gateway Address and IP Address/
Range in these text boxes.
MAC Address (read-only):
The MAC is set at the factory to a guaranteed unique address that
you cannot modify.
Click
[Change IP Address]
to save. Otherwise, click
[Reset]
to revert to the previously
assigned IP Gateway and IP Address/Range.
System Account Access Information
Admin, Read/Write, and Read Only Names and Passwords:
The factory defaults for these names/passwords are:
Admin
comtech/comtech
Read/Write
opcenter/1234
Read Only
monitor/1234
Note the following:
These
Name
fields can be any alphanumeric combination with a maximum length of 10
characters.
These
Password
fields can be any alphanumeric combination with a maximum length of
10 characters.
Make the desired configuration settings in this section, and then click
[Change Access]
to
save these changes. Otherwise, click
[Reset]
to revert to the previously assigned System
Account Access Information.
