Comtech EF Data SDM-300L3, Инструкция по установке и эксплуатации

Страница: 77 / 408

SDM-300L3 Satellite Modem Revision 1
Front Panel Operation MN/SDM300L3.IOM
4–9
To change the rate using the variable rate selection, press <ENTER> when TX-V is
displayed. A flashing cursor is displayed on the first character of the coding type on line
1. Press [
←
] or [
→
] to move the flashing cursor, and [
↑
] or [
↓
] to increment or
decrement the digit at the flashing cursor. Press <ENTER> to execute the change.
Notes:
1. When the TX rate has been programmed, the transmitter is automatically turned
off to prevent swamping of other channels. To turn the transmitter on, use the
TX-IF Output function.
2. Code Rate 3/4 not compatible with a combination of a CSC Closed Modulator
Type and Sequential Encoder.
Code Rate Data Rate Range
Non-Turbo Requirements
BPSK 1/2 2.4 to 1250 kbps
{O}QPSK 1/2 4.8 to 2500 kbps
{O}QPSK 3/4 7.2 to 3750 kbps
QPSK 7/8 8.4 to 4375 kbps
8-PSK 2/3 64.0 to 5000 kbps
BPSK 1/1 4.8 to 2500 kbps
{O}QPSK 1/1 9.6 to 5000 kbps
Turbo Requirements
BPSK 21/44 2.4 to 1193.181 kbps
BPSK 5/16 2.4 to 781.25 kbps
{O}QPSK 1/2 4.8 to 2386.363 kbps
8-PSK 3/4 384 to 5000 kbps
Burst Mode Data Range
BPSK 5/16 2.4 to 781.25 kbps
{O} QPSK 1/2 4.8 to 2386.363 kbps
8-PSK 3/4 384 to 5000 kbps
Burst Mode Data Range
BPSK 5/16 2.4 to 781.25 kbps
{O} QPSK 1/2 4.8 to 2386.363 kbps
8-PSK 3/4 384 to 5000 kbps
Notes:
1. Max Symbol Rate = 2500 ksps
2. Max Data Rate for Low Var. Rate: 512 kbps.
3. OQPSK Option only: OQPSK 1/2, 3/4, and 7/8